The net is flooded with lots of painting ideas. But before picking up a comb and making paint patterns throughout one's home, it is essential to master a couple of fundamentals related to accommodate painting. Paints for interior walls are a combination of liquid and coloured powders which are technically called pigments. Binder is the liquid that holds these pigments and carries it through allowing a painter to spread the paint on walls. Paint is generally thinned with solvent or plain tap water just before application. House paints are of many types namely water based latex paints, oil based house paints, plaster or wood primers and enamel paints. Each one has specific usage and must be used only if it suits the need ZEOLIS House Painters. Some are best for bathrooms and other moisture prone rooms while others are for regular living spaces. These are surface specific like wood or cement, therefore it is advisable to ensure that the paint chosen by a home owner is applied on the best surface.

Preparing the surface:

Paint application on any surface, be it wood, aluminium, concrete or cement, must be preceded by the best surface preparation techniques. Badly prepared surfaces impede with the durability and quality of the emulsion. Furthermore, there are likelihood of wall paint defects like splitting, blistering, powdering, peeling or cracking to develop. So after determining the surface type, it is essential that the surface is created free from dust, grease, grime or any other form of dirt. Next, the primer must be applied onto the surface. That is an important step as a preliminary primer application prevents chipping of paint along with elongates the surface coat's life. After this 1 can go about applying the surface coat.

Selecting the most appropriate surface coat for a wall:

Any random surface coat doesn't work on every surface. Surface coats are of many types and one must choose the one suiting the wall's needs. Normally water based latex paints dry quickly and are easy to completely clean with soapy water. They are best for interior walls in dry areas such as the family room, dining room, corridors which are not exposed to weather and bedrooms as well. Oil based paints take longer to dry. Recoat application must be done only after the first coat is completely dry after a difference of 24 hours. These paints hand out fumes, so the room that they are applied in must be ventilated properly. Cleaning them requires turpentine oil or mineral spirits. They are best suited for bathrooms, wash basin areas and kitchens.

After deciding upon the kind of paint a wall requires, along with, sheen and patterns must be decided. All wall paints can be found in various sheens namely egg-shell or satin, flat, gloss and semi gloss types. In case of confusions, a DIY owner can get every one in small quantities to try them on a tiny portion of the wall. This provides a difficult idea about the specific look.

After all of the above tasks are done, you can go about painting the walls. To start, the furniture must be taken out and floors must be covered with cloths. The entire surface must be dusted and rinsed. Spackling paste should be used to correct cracks and holes. Rough spots could be evened out with sand paper. When done, you can start priming followed closely by painting to give a complete new check out a living space.