What is the steps of how to build Aluminium Lighting Truss? from Zhanshi's blog

Aluminium lighting Truss It is also called truss to be widely used in various stage, tricks, exhibitions, etc. There are some flat scenes, the book number of the truss, and have a great difference in genre and information. It can not be based on different use. Carefully select the truss development of different materials, then, how is a stage of a stage to be built? How is it going?

1: First of all, I have to put four corner reefs to make the four corner reefs, and the legs will be debugged, so that they are in the same task face, then insert the truss outside the four corners to support the lower part. .

2: To fix the back of the screw on the tross, the soul is lost, and the screw will not be rotated. Set good connection, such a beam some to form it.

3: Put the terminal strings again, twist your head on one end of the interior, Aluminium Lighting Truss is screwed on the other, and then hanging the zucchini and the horizontal, it is Used to raise the beam truss in the lower side, so good for this step is enough to find a sponsorship, bring the main column truss in the increasing juence, never exhaus, be careful, take the main column, and then turn the back of the back Fixed.

4: Since then, hang the gourd to hook the beam through the garter belt, and then the beam gradually pulls up and the first position of people can not, and then the lighting sound is loaded on the beam.

5: If you have a good thing in the previous steps, you have to check the four of the four seats of the two. There are no horizontal lines, and the slanting plus rod should be fixed on the other hand. The photometric frame is built.

Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment


By Zhanshi
Added Nov 16 '21



Your rate:
Total: (0 rates)